Extreme Networks BlackDiamond 8800 Series - Page 220

Replacing a BlackDiamond 12804 or 8800 Series Fan Tray
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
220
Figure 146: Installing the fan tray in the BlackDiamond 8806/12804 switch
3 Use a #2 Phillips screwdriver to turn each captive screw clockwise to tighten the screws (Figure 145).
Leave the ESD-preventive wrist strap permanently connected to the switch so that it is always available
when you need to touch ESD-sensitive components.
EX_115
Fan tray
handle
Fan tray
captive
screws (x2)