EasyManua.ls Logo

Extreme Networks BlackDiamond 8800 Series - Summit X250 E-24 P Switch; Summit X250 E-24 P Switch Front Panel

Extreme Networks BlackDiamond 8800 Series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
244
Two high-performance stacking ports with associated LEDs
Redundant power input connector for an optional, redundant Extreme External Power Supply (see
“EPS-160 External Power Module (with EPS-T)” on page 309 for complete details). The connecting
redundant power supply cable is shipped with the EPS-500 unit.
AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
Summit X250e-24p Switch
The Summit X250e-24p switch is a compact unit 1.75 inches high (1 U) that includes the following:
Twenty-four fixed 10/100BASE-T PoE ports (ports 1–24) that deliver high-density copper
connectivity and a full 15.4 Watts of PoE per port
Two combination ports (ports 25–26) that provide 10/100/1000 BASE-T PoE or mini-GBIC
connectivity for 2 Gbps of copper or fiber connectivity
NOTE
For information about mini-GBICs, see “Mini-GBIC Interfaces” on page 338.
Two high-performance stacking ports with associated LEDs
Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
10911). When this power supply is used with the Summit X250-24p switch, the power supplies
(internal and redundant) are fully fault tolerant and load-sharing. If one power supply fails, the
other power supply will provide sufficient power to operate the switch.
Summit X250e-24p Switch Front Panel
Figure 169 shows the front panel of the Summit X250e-24p switch.
Figure 169: Summit X250e-24p switch front panel
The front panel on the Summit X250e-24p switch includes:
LEDs—For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs”
on page 250.
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
10/100BASE-T PoE ports—Twenty-four 10/100BASE-T PoE ports that deliver high-density copper
connectivity and a full 15.4 Watts of PoE per port
1
2
Stack
SH_040A
10/100 Mbps ports
Console
port
Shared ports Stack number indicator

Table of Contents

Related product manuals