Extreme Networks BlackDiamond 8800 Series - Page 258

Summit Family of Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
258
The rear panel on the Summit X450a-24t switch includes:
● Slot for a Summit option card
■ Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
OR
■ Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
NOTE
For information regarding these compatible Summit option cards, see “Summit XGM2-2xn Option Card” on
page 297 or “Summit XGM2-2xf Option Card” on page 302.
● Management port
■ Used to connect the system into a parallel management network for administration.
OR
■ Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
● Two LEDs for the management port, located at the bottom corners of the port.
● Two high-performance stacking ports
● Redundant power input connector for an optional, redundant Extreme External Power Supply (see
“EPS-LD External Power Supply Unit” on page 313 for complete details). The connecting redundant
power supply cable is shipped with the EPS-LD.
● AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.