BlackDiamond 8800 Series Switches Hardware Installation Guide
141
CHAPTER
10
BlackDiamond PSU Covers
Covers are available to mask the front panels of the installed power supplies in the BlackDiamond 8800
series switches.
This chapter includes the following sections:
● Required Tools on page 141
● BlackDiamond 8806 PSU Cover on page 142
● BlackDiamond 8810 PSU Cover on page 145
Required Tools
You need a #2 Phillips screwdriver to attach the power cord management bracket to the switch.
After the power cord management bracket is installed, you do not need any tools to attach the PSU
cover.
To Next Page
Loading...
