BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
28
8500-G24X-e
The 8500-G24X-e I/O module (Figure 11) has 24 unpopulated SFP-based 1-gigabit Ethernet ports.
Figure 11: 8500-G24X-e I/O Module
In the default configuration of the 8500-G48T-e I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 8500-G24X-e I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 8500-G24X-e I/O module, see “I/O Module
LEDs” on page 50.
Module status LEDs
BD_231
1000BASE-X
ports