Extreme Networks BlackDiamond 8810 - G48 Xa I;O Module

BlackDiamond 8800 Series Switches Hardware Installation Guide
35
G48Xa I/O Module
The G48Xa I/O module (Figure 17) has 48 unpopulated SFP-based 1000BASE-X ports.
Figure 17: G48Xa I/O Module
In the default configuration of the G48Xa module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The G48Xa module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the G48Xa module, see “I/O Module LEDs” on
page 50. For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Module status LEDs
ASP049A
1000BASE-X
ports