BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
50
8900-G48X-xl I/O Module
The 8900-G48X-xl I/O module (Figure 32) has 48 unpopulated SFP-based 1-gigabit Ethernet ports.
Figure 32: 8900-G48X-xl I/O Module
In the default configuration of the 8900-G48X-xl I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 8900-G48X-xl I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 8900-G48X-xl I/O module, see “I/O Module
LEDs” on page 50.
I/O Module LEDs
This section describes the LEDs for the module, the port, and inline power delivery status for I/O
modules in the BlackDiamond 8800 series of switches.
Inline power delivery applies only to the ports on the G48P and G48Pe I/O modules or to a G48tc,
G48Te2, 8500-G48T-e, or 8900-G48T-xl I/O module with an installed S-POE card.
Module status LEDs
BD_281
1000BASE-X
ports
To Next Page
Loading...
