Extreme Networks BlackDiamond 8810 - Rack-Mounting the Chassis

Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
92
Figure 56: Attaching the Mid-mount Brackets to the BlackDiamond 8810 Chassis
Rack-Mounting the Chassis
To install the BlackDiamond 8800 series chassis in a rack:
1 Locate the 19-inch support bracket that is shipped with the BlackDiamond 8800 series chassis.
2 Identify the rack location where the chassis will be installed.
3 Using four rack mounting screws, attach the support bracket to the equipment rack immediately
below the chassis location (Figure 57).
You must provide the screws for attaching the support bracket.
ASP034