BlackDiamond 8800 Series Switches Hardware Installation Guide
93
Figure 57: Attaching the Support Bracket to the Rack
4 Lift the back of the empty chassis onto the support bracket.
5 Slowly guide the chassis into the rack until the mounting brackets are against the rack uprights.
6 Secure the chassis to the rack using eight rack mounting screws. (Screws are not provided.) Be sure
that the screws are tight. Refer to Figure 58 and Figure 59 for the screw locations.
Figure 58 and Figure 59 show a standard rack mount. For mid-mount installation, use the same
mounting locations shown in the figure, but insert the screws through the designated slot locations of the mid-
mount brackets.
To Next Page
Loading...
