Extreme Networks Extreme 7520 Series - Two-Post Rack Mount

Figure 23: Front Installation: Inserting the Device
To install the device in the rear of the rack, slide the device into the outer rails in the
rear of the rack.
Figure 24: Rear Installation: Inserting the Device
Secure the device to the rack using the thumb screws on the mounting ears.
Figure 25: Secure the Device
Two-Post Rack Mount
You can attach the switch to a two-post rack in either of two congurations:
• Front mount
Install the Switch Two-Post Rack Mount
Extreme 7520 Hardware Installation Guide 57