Extreme Networks ExtremeWare XOS - Configure Netlogin Local-User

Network Login Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1062
configure netlogin local-user
configure netlogin local-user <user-name> {vlan-vsa [[{tagged | untagged}
[<vlan_name>] | <vlan_tag>]] | none]}
Description
Configures an existing local netlogin account.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to modify the attributes of an existing local netlogin account. You can update the
following attributes associated with a local netlogin account:
● Password of the local netlogin account
● Destination VLAN attributes including: adding clients tagged or untagged, the name of the VLAN,
and the VLAN ID
NOTE
Passwords are case-sensitive and must have a minimum of 1 character and a maximum of 32 characters.
You must create a local netlogin account before using this command. To create a local netlogin user
name and password, use the following command:
create netlogin local-user <user-name> {encrypted <password>} {vlan-vsa [[{tagged |
untagged} [<vlan_name>] | <vlan_tag>]]}
If the switch displays a message similar to the following:
* SummitX450.14 # configure netlogin local-user purplenet
^
%% Invalid input detected at '^' marker.
user-name Specifies the name of an existing local netlogin account.
tagged Specifies that the client be added as tagged.
untagged Specifies that the client be added as untagged.
vlan_name Specifies the name of the destination VLAN.
vlan_tag Specifies the VLAN ID, tag, of the destination VLAN.
none Specifies that the VSA 211 wildcard (*) is applied, only if you do not specify
tagged or untagged