configure ospf import-policy
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1561
configure ospf import-policy
configure ospf import-policy [<policy-map> | none]
Description
Associates or removes the policy applied to OSPF routes added to the system routing table.
Syntax Description
Default
No policy.
Usage Guidelines
Use this command to associate a policy with the OSPF routes installed into the system table. Use the
none option to remove the policy association.
Example
The following example applies the policy campuseast to OSPF routes:
configure ospf import-policy campuseast
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
policy-map Specifies the policy to apply.
To Next Page
Loading...