Troubleshooting Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1986
show tech
show tech {all | <area>} {detail}
Description
Displays the output of various show commands to assist in monitoring and troubleshooting the switch.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command only under the guidance of Extreme Networks Technical Support personnel to view
your switch configurations and to troubleshoot the switch.
The
show tech command displays the output of the following show commands, among others:
● show bootprelay
● show configuration
● show dhcp-client state
● show diagnostics
● show memory
● show odometers
● show policy
● show port rxerror
● show port txerror
● show power
● show power budget
● show power controller
● show process
● show radius
● show session
● show switch
● show tacacs
all Indicates all available show command output to be displayed.
area Specifies one tech support area. For example, if you want to view STP
information, enter stp.
detail Specifies more detailed information.
To Next Page
Loading...