Extreme Networks ExtremeWare XOS - Show Snmpv3 Engine-Info

show snmpv3 engine-info
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
217
show snmpv3 engine-info
show snmpv3 engine-info
Description
Displays information about the SNMPv3 engine on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following show engine-info output is displayed:
● Engine-ID—Either the ID auto generated from MAC address of switch, or the ID manually
configured.
● Engine Boots—Number of times the agent has been rebooted.
● Engine Time—Time since agent last rebooted, in centiseconds.
● Max. Message Size—Maximum SNMP Message size supported by the Engine (8192).
Example
The following command displays information about the SNMPv3 engine on the switch:
show snmpv3 engine-info
The following is sample output from this command:
SNMP Engine-ID : 80:0:7:7c:3:0:30:48:41:ed:97 'H'
SNMP Engine Boots : 1
SNMP Engine Time : 866896
SNMP Max. Message Size : 8192
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.