Extreme Networks ExtremeWare XOS - Page 226

Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
226
View Name : defaultUserView
MIB Subtree : 1.3.6.1.6.3.18
View Type : Excluded
Storage Type : Permanent
Row Status : Active
View Name : defaultUserView
MIB Subtree : 1.3.6.1.6.3.15.1.2.2.1.4
View Type : Excluded
Storage Type : Permanent
Row Status : Active
View Name : defaultUserView
MIB Subtree : 1.3.6.1.6.3.15.1.2.2.1.6
View Type : Excluded
Storage Type : Permanent
Row Status : Active
View Name : defaultUserView
MIB Subtree : 1.3.6.1.6.3.15.1.2.2.1.9
View Type : Excluded
Storage Type : Permanent
Row Status : Active
View Name : defaultAdminView
MIB Subtree : 1
View Type : Included
Storage Type : Permanent
Row Status : Active
View Name : defaultNotifyView
MIB Subtree : 1
View Type : Included
Storage Type : Permanent
Row Status : Active
Total num. of entries in vacmViewTreeFamilyTable : 8
The following command displays a view with the view name Roview and subtree 1.3.6.1.2.1.1:
show snmpv3 mib-view Roview subtree 1.3.6.1.2.1.1
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_view_name parameter was added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.