Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
408
● FDB sync
● ACL sync
● RT sync
● Operational
Example
You see slightly different displays, depending on the platform.
BlackDiamond 8800 series switch only. The following example displays module information for all slots:
Slots Type Configured State Ports Flags
-------------------------------------------------------------------------------
Slot-1 Empty 0
Slot-2 G24X G24X Operational 24 M S
Slot-3 Empty 0
Slot-4 Empty 0
Slot-5 G8X G8X Operational 8 M S
Slot-6 Empty 0
Slot-7 G48P Empty 48
Slot-8 G48P Operational 48 M S
Slot-9 10G4X 10G4X Powered OFF 4 SI
Slot-10 Empty 0
MSM-A MSM-G8X Operational 0 S
MSM-B Empty 0
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
The following example displays module information for a specified slot on the BlackDiamond 8810
switch:
BD-8810.3 # show slot 2
Slot-2 information:
State: Operational
Download %: 100
Flags: M S
Serial number: 800115-00-02 04314-00006
Hw Module Type: G24X
SW Version: 11.1.0.0
SW Build: v11100 by Wed Oct 20 16:01:52 PDT 2004
Configured Type: G24X
Ports available: 24
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
To Next Page
Loading...