Commands for Connectivity Fault Management
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
432
configure cfm domain delete association
configure cfm domain <domain_name> delete association <association_name>
Description
Deletes a maintenance association (MA), including all its configured values, from the switch.
Syntax Description
Default
N/A.
Usage Guidelines
When you delete an association, or MA, you also remove all its configured values from the switch.
These values include all configured MEPs, MIPs, and CFFs.
Example
The following command deletes the MA test, in the domain of brazil, from the switch, along with all its
configured MIPs, MEPs, and CFFs:
configure cfm domain brazil delete association test
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
domain_name Enter the domain associated with the MA you are deleting.
association_name Enter the name of the MA you are deleting.
To Next Page
Loading...