Commands for Connectivity Fault Management
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
446
show cfm
show cfm {<domain_name> {<association_name> {{ports <port_list>} {[end-
point [inward-facing | outward-facing] | intermediate-point | filter-
function]]}}}}
Description
Displays the current CFM configuration on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the following information:
● Domain names
● MA levels
● Association names
● VLAN names
● Inward-facing MEPs
● MEPIDs
● MEP transmit intervals
● Outward-facing MEPs
● Intermediate points (MIPs)
● Total number of CFM ports on the switch
See “Supported Instances for CFM” for the number of domains, ports, MEPs, MIPs, CFFs, and
associations supported on the switch.
domain_name Enter the name of the domain you want to display.
association_name Enter the name of the association you want to display.
port_list Enter the ports in the domain and association you want to display.
inward-facing Enter this to display the inward-facing MEP for the specified MA.
outward-facing Enter this to display the outward-facing MEP for the specified MA.
intermediate-point Enter this to display the MIPs for the specified MA.
filter-function Enter this to display the CFFs for the specified MA.
To Next Page
Loading...