Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
490
configure lldp transmit-hold
configure lldp transmit-hold <hold>
Description
Calculates the actual time-to-live (TTL) value used in the LLDPDU messages. The formula is transmit-
interval * transmit-hold
; by default the TTL value is (30*4) 120 seconds.
Syntax Description
Default
4.
Usage Guidelines
N/A.
Example
The following command configures the transmit-hold value (which is used to calculate the TTL of the
LLDP packets) to 5:
configure lldp transmit-hold 5
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
hold Used to calculate the TTL value; the range is 2 to 10.
To Next Page
Loading...