Boot Option Commands
Summit 200 Series Switch Installation and User Guide 237
upload configuration [<ipaddress> |
<hostname>] <filename> {every <time>}
Uploads the current run-time configuration to
the specified TFTP server. If every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. If the time option is not
specified, the current configuration is
immediately uploaded.
upload configuration cancel Cancels a previously schedule configuration
upload.
use configuration [primary | secondary] Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area or the
secondary configuration area.
use image [primary | secondary] Configures the switch to use a particular image
on the next reboot.
Table 69: Boot Option Commands (continued)
Command Description
To Next Page
Loading...
