Network Setup
Summit WM3000 Series Controller System Reference Guide104
9 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
10 Click OK to use the changes to the running configuration and close the dialog.
11 Click Cancel to close the dialog without committing updates to the running configuration.
Viewing Virtual Interface Statistics
The Statistics screen displays information about packet level statistics and errors at the interface.
To view virtual interface statistics:
1 Select Network > Controller Virtual Interface from the main tree menu.
2 Select the Statistics tab.
Refer to the following to assess the network throughput of existing virtual interfaces:
Name
Displays the user defined interface name. The corresponding statistics are
displayed along the row. The statistics are the total traffic to the interface
since its creation.
Bytes In
Displays the number of bytes coming into the interface. The status is not
self-updated. To view the current status, click the
Details
button.
Packets In
Displays the number of packets coming into the interface (including
packets dropped, error packets, etc.)
To Next Page
Loading...