Network Setup
Summit WM3000 Series Controller System Reference Guide130
6 Ensure Advanced is selected from within the This WLAN’s Web Pages are of the drop-down menu.
Define the advanced hotspot configuration following step 5 onward in “Configuring an Advanced
Hotspot” on page 127.
For information on configuring external Radius server support for supporting a advanced hotspot, see
“Configuring External Radius Server Support” on page 133.
7 Use the controller CLI to define the attributes of the local Radius server configuration.
The following is an example of just the CLI needed to support the local Radius server configuration:
wlan 2 enable
wlan 2 description XTRM-GUEST
wlan 2 ssid XTRM-GUEST
wlan 2 vlan 70
wlan 2 authentication-type hotspot
wlan 2 mu-mu-disallow
wlan 2 hotspot webpage-location advanced
wlan 2 radius server primary 192.168.10.14
wlan 2 radius server primary radius-key 0 ESELAB
wlan 2 radius reauth 3600
wlan 2 radius accounting server primary 192.168.10.14
wlan 2 radius accounting server primary radius-key 0 ESELAB
!
! Output Omitted
!
radius-server local
authentication eap-auth-type all
nas 192.168.10.0/24 key 0 ESELAB
ldap-group-verification disable
ca trust-point ESELAB
server trust-point ESELAB
group "Guests"
guest-group enable
To Next Page
Loading...