Network Setup
Summit WM3000 Series Controller System Reference Guide152
Configuring WMM
Use the WMM tab to review a WLAN’s current index (numerical identifier), SSID, description, current
enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1 Select Network > Wireless LANs from the main menu tree.
2 Click the WMM tab.
The WMM tab displays the following information:
Idx
Displays the WLANs numerical identifier. This field is displayed in a two
part format. The first number is the WLAN index and the second number
is a sub-index corresponding to the access category. Click the Edit button
to modify this property.
SSID
Displays the Service Set ID (SSID) associated with each WLAN.
Description
Displays a brief description of the WLAN.
WLAN enabled
Displays the status of the WLAN. A Green check defines the WLAN as
enabled and a Red "X" means it is disabled. The enable/disable setting
can be defined using the WLAN Configuration screen.
WMM enabled
Displays WLAN-WMM status. It can be enabled (for a WLAN) from the
WLAN Configurations Edit screen by selecting the Enable WMM
checkbox.
To Next Page
Loading...