Network Setup
Summit WM3000 Series Controller System Reference Guide162
7 Use the Edit button to modify devices parameters.
8 To delete a list configuration for a device, select a row from the List Configuration field and click the
Delete button.
Adding an Exclude List to the WLAN
To exclude a device from a WLAN:
1 Select Network > Wireless LANs from the main menu tree.
2 Select the NAC Exclude tab to view NAC exclude devices.
3 Click on the Add button in the Exclude Lists field.
4 Enter the name of the device that you wish to exclude for NAC authentication.
5 Refer to the Status field. It displays the current state of the requests made from the applet. Requests
are any “SET/GET” operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
6 Click OK to save and add the new configuration and close the dialog window.
7 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring Devices on the Exclude List
To add more than one device for a particular type of device in the include list:
1 Select Network > Wireless LANs from the main menu tree.
2 Select the NAC Exclude tab to view and configure all the NAC exclude devices.
3 Click on the Add button in the List Configuration field.
To Next Page
Loading...