Network Setup
Summit WM3000 Series Controller System Reference Guide178
3 Refer to the table for the following information:
Index
Displays the numerical index (device identifier) used with the device
radio. Use this index (along with the radio name) to differentiate the radio
from other device radios.
Description
Displays a user assigned name for the radio.
AP Type
Displays the type of Access Point detected. The controllers support
Extreme Networks AP35XX model Access Points.
Type
Use the Type to identify whether the radio is 802.11a radio or an
802.11bg radio.
Adopted
Displays the radio’s adoption status. If the radio is adopted, a green
check displays. If the radio is not adopted, a red X displays.
Parent AP MAC
Address
Displays the Access Point's Ethernet MAC (the device MAC address that
is printed on the casing of the unit). Please do not confuse this BSSID
MAC with the Access Point's Ethernet MAC address.
To Next Page
Loading...