Network Setup
Summit WM3000 Series Controller System Reference Guide182
Editing AP Settings
The Edit screen provides a means of modifying the properties of an existing radio. This is often
necessary when the radio’s intended function has changed and its name needs modification or if the
radio now needs to be defined as a detector radio. The Edit screen also enables you to modify
placement, channel and power settings as well as a set of advanced properties in case its transmit and
receive capabilities need to be adjusted.
The screen display can vary slightly depending on whether the Access Point radio is an 802.11a or 802.11bg
model.
To edit a radio’s configuration:
1 Select Network > Access Point Radios from the main menu tree.
2 Click the Configuration tab.
3 Select a radio to edit from the table.
4 Click the Edit button to display a screen containing settings for the selected radio.
5 For the Radio Descr, enter a brief description to differentiate this radio from others with potentially
similar configurations. The description is used to describe radios of the same type and can be used
to locate a radio if there are any problems.
6 Select the Dedicate this AP as Detector AP option to use this radio as a detector port to identify rogue
APs on the network.
To Next Page
Loading...