Summit WM3000 Series Controller System Reference Guide 191
5 Select a radio from those displayed and click the Details button for additional radio information in
raw data format. For more information, see “Viewing AP Statistics in Detail” on page 191.
6 Select a radio from those displayed and click the Graph button for additional radio performance
information in graphical format. For more information, see “Viewing AP Statistics in Detail” on
page 191.
7 Click on the Show Filtering Options link to set filtering parameters to filter information displayed on
the screen. Once the Show Filtering Options link is selected, the Filter Option Zone which allows the
selection of filtering parameters is displayed. Up to two parameters may be selected.
Within the Filter Option Zone the following options are presented:
● And / Or - Use the And/Or drop down list to expand the selection criteria. Up to two selection
criteria are supported.
● Filter Entire Table - Click Filter Entire Table to apply the filtering criteria on the information being
displayed on the screen.
● Turn Off Filtering - Click Turn Off Filtering to turn off filtering and display all information. Use this
button and the Filter Entire Table button to refresh screen contents after making changes to the
filtering criteria.
When filtering is disabled, a message is displayed at the bottom of the screen. Similarly, when
filtering is enabled, the filtering criteria is displayed at the same place on the screen.
Viewing AP Statistics in Detail
The Details screen provides additional (and more specific) traffic, performance and error information for
the selected radio.
To view Radio Statistics Details:
1 Select Network > Access Point Radios from the main menu tree.
2 Click the Statistics tab.
3 Select a radio from the table and click the Details button to display a screen with detailed statistics
for that radio.
Radio statistics details are split into four fields: Information, Traffic, RF Status and Errors. Information
in black represents the statistics from the last 30 seconds and information in blue represents statistics
from the last hour.
4 Refer to the Information field for the following information:
Retries
Displays the average number of retries for all MUs associated with the
selected radio.
Description
Displays a brief description of the radio to help differentiate the radio
from similar models.
MAC Address
Displays the Hardware or
Media Access Control
(MAC) address for the
Access Point. Access Points with dual radios will have a unique hardware
address for each radio.
Num Associated
Stations
Displays the number of MUs currently associated with the radio.
To Next Page
Loading...