Network Setup
Summit WM3000 Series Controller System Reference Guide232
5 Select Apply to save the changes to the Snoop Enable and Unknown Multicast Forward options.
6 Review to the following to discern whether an existing snoop configuration requires revision.
7 Optionally, select a VLAN Index from amongst those listed, and select Edit to revise the Snoop
Enable, Unknown Multicast Forward, Learning Mode and Multicast Router Ports.
Vlan Index
Lists the VLAN interfaces upon which snooping and unknown multicast
forward is enabled or disabled
Snoop Enable
Displays whether IGMP snooping is enabled/disabled on the VLAN Index
listed.
Unknown Multicast
Forward
Displays whether unknown multicast traffic is enabled/disabled on the
VLAN Index listed.
Learning Mode
Displays the learning mode the controller uses to listen to messages to
detect router ports with IGMP snooping. Modes include:
•
pimDvmrp(1)
- Protocol Independent Multicast and Distance Vector
•
static
- Static entry
Mulitcast Router
Ports
Displays the name of the multicast router port discovered as part of the
snooping process. If no port has been detected, a
No port Discovered Yet
message displays.
To Next Page
Loading...