Controller Services
Summit WM3000 Series Controller System Reference Guide244
1 Select Services > DHCP Server from the main menu tree.
2 Highlight an existing pool name from within either the Configuration or Host Pool tab and click the
Options Setup button at the bottom of the screen.
3 Click the Insert button to display an editable field wherein the name and value of the DHCP option
can be added.
4 Name the option as appropriate, assign a Code (numerical identifier) and use the Type drop-down
options to specify a value of ip or ascii to the DHCP global option.
5 Highlight an entry from within the Global Options screen and click the Remove button to delete the
name and value.
6 Click OK to save and add the changes to the running configuration and forward the updates to the
other peer controllers comprising the mobility domain.
7 Refer to the Status field.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the controller.
8 Click Cancel to close the dialog without committing updates to the running configuration
Configuring DHCP Server DDNS Values
The DHCP Server screen’s Configuration tab can be used to display an additional DDNS screen. Use
this screen to define a DDNS domain name and address for use with the controller.
To configure a global domain name and DDNS server address:
1 Select Services > DHCP Server from the main menu tree.
2 Highlight an existing pool name from within either the Configuration or Host Pool tabs and click the
DDNS button at the bottom of the screen.
To Next Page
Loading...