Controller Services
Summit WM3000 Series Controller System Reference Guide252
3 Refer to the contents of the Bindings tab for the following information:
4 Click the Export button to display a screen used to export the DHCP Binding information to a secure
location.
Reviewing DHCP Dynamic Bindings
Dynamic DHCP bindings automatically map a hardware address to an IP address from a pool of
available addresses. The Dynamic Bindings tab displays only automatic bindings.
To view detailed Dynamic DHCP Binding Status information:
1 Select Services > DHCP Server from the main menu tree.
2 Select the Dynamic Bindings tab.
IP Address
Displays a IP address for each client with a listed MAC address. This
column is read-only and cannot be modified.
MAC Address / Client
ID
Displays the MAC address (client hardware ID) of the client using the
controller’s DHCP Server to access controller resources. The MAC address
is read-only and cannot be modified.
To Next Page
Loading...