Controller Services
Summit WM3000 Series Controller System Reference Guide260
3 An ACL Id must be created before it is selectable from any of the drop-down menus. Refer to the
Access Group field to define the following:
4 Refer to the Other Settings field to define the following:
Full Access
Supply a numeric ACL ID from the drop-down menu to provide the ACL
full access.
Only Control Queries
Supply a numeric ACL ID from the drop-down menu to provide the ACL
only control query access to SNTP resources.
Server and Query
Access
Enter a numeric ACL ID from the drop-down menu to provide the ACL
Server and Query access to SNTP resources.
Only Server Access
Provide a numeric ACL ID from the drop-down menu to provide the ACL
only server access to SNTP resources.
Authenticate Time
Sources
Select this checkbox to ensure credential authentication takes place
between the SNTP server and the controller. When this checkbox is
selected, the Apply and Revert buttons become enabled to save or cancel
settings.
Act As NTP Master
Clock
When this checkbox is selected, the Apply and Revert buttons become
enabled to save or cancel settings within the Other Settings field.
To Next Page
Loading...