Summit WM3000 Series Controller System Reference Guide 277
4 The Apply and Revert buttons are unavailable (at the bottom of the screen) for use with the Status
screen, as there are no editable parameters to save or revert.
Configuring Redundancy Group Membership
The redundancy group should be disabled to conduct an Add/Delete operation. There are a minimum
of 2 members needed to comprise a Redundancy Group, including the initiating controller
To configure controller redundancy memberships:
1 Select Services > Redundancy from the main menu tree.
The Redundancy screen displays with the Configuration tab selected.
2 Select the Member tab.
Mobile Units on this
controller
Displays the number of MUs currently associated with the radio(s) used
with this controller. Compare this number with the number of MUs within
the group to determine how effectively MUs are distributed within the
cluster.
To Next Page
Loading...