Overview
Summit WM3000 Series Controller System Reference Guide28
● A CLI Service mode enabling the capture of system status information that can be sent to Extreme
Networks personnel for use in problem resolution
● The support for Simple Network Management Protocol (SNMP) version 3 as well as SNMP version 2
● Upload and download of Access Point firmware and configuration files using TFTP, FTP, SFTP and
HTTP.
● Transfer of firmware and configuration files using Compact Flash (Summit WM3700 only) or USB
● The graphing of wireless statistics
● A GUI dashboard summary of system status
● Heat map support for RF deployment
● Secure guest access with specific permission intervals
● Controller discovery enabling users to discover each Extreme Networks controller on the specified
network.
Security Features
Controller security can be classified into wireless security and wired security.
The controller includes the following wireless security features:
● Encryption and Authentication
● MU Authentication
● Secure Beacon
● MU to MU Disallow
● 802.1x Authentication
● WIPS
● Rogue AP Detection
The controller includes the following wired security features:
● ACLs
● Local Radius Server
● IPSec VPN
● NAT
● Certificate Management
● NAC
Encryption and Authentication
The controller can implement the following encryption and authentication types:
● WEP
● WPA
● WPA2
To Next Page
Loading...