Summit WM3000 Series Controller System Reference Guide 291
3 Refer to the following information within the MU Status tab.
Configuring Controller Discovery
Controller discovery enables the SNMP discovery (location) of devices. To discover devices in the
specified range of IP addresses, the controller Web UI sends SNMP GET requests (using the user
specified SNMP v2 or v 3 version) to all IP addresses on the specified network. The results of the
discovery are helpful for isolating devices compatible for operation with the locating controller, thus
extending the potential coverage area and MU support base within the controller managed network.
Use the Discovery Profiles tab to view existing SNMP search profiles using a user defined range of IP
addresses. Existing profiles can be modified or deleted and new profiles can be added as needed. Refer
MU MAC
Displays each listed Client’s factory coded hardware address.
MU IP Address
Lists each Client’s assigned network IP address
Home Ctlr IP
Displays each Client’s assigned home controller IP address.
Home Ctlr VLAN
Lists the controller VLAN the listed Client is a member of.
Curr Ctlr IP
Displays each Client’s current controller IP address, if different from the
Client’s home controller IP address.
Roam
Lists the number of times the listed Client has roamed to a different
access point radio.
To Next Page
Loading...