Controller Security
Summit WM3000 Series Controller System Reference Guide318
3 The Unapproved APs (Reported by MUs) table displays the following information:
4 The Number of Unapproved APs is simply the sum of all of Unapproved Radio MAC Addresses
detected.
5 Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
BSS MAC Address
Displays the MAC Address of each Unapproved AP. These MAC addresses
are Access Points observed on the network (by associated MUs), but have
yet to be added to the list of approved APs, and are therefore interpreted
as a threat on the network.
Reporting MU
Displays the numerical value for the detecting MU.
Last Seen (Seconds)
Displays the time (in seconds) the Unapproved AP was last seen on the
network by the detecting MU. Use this interval to determine whether the
detected MU is still a viable threat. Click on the Configuration tab to
modify the time an unseen AP is permitted to remain on the list of
Approved APs.
ESSID
Displays the ESSID of each Unapproved AP. These ESSIDs are device
ESSIDs observed on the network, but have yet to be added to the list of
Approved APs and are therefore interpreted as a threat.
To Next Page
Loading...