Summit WM3000 Series Controller System Reference Guide 333
4 Refer to the following information as displayed within the Attach Role tab:
5 Click on Add button to add a new role.
6 Select an interface and click the Delete button to delete the interface configuration from the controller.
Creating a Role Based Firewall Rule
After creating an ACL, it can be applied to one or more Roles. On a role, acls can be applied in either an
inbound or outbound direction.
To add an ACL interface to the controller:
1 Select Security > Wireless Firewall from the main menu tree.
2 Click the Security Policy tab.
3 Click the Attach Role tab.
Role Priority
Displays the priority assigned to the role as determined by the
Sequence
Number
associated with the role.
Role Name
Displays the role name assigned to each role. Role names are assigned
when they are added from the
Security
>
Wireless Firewall
>
Configuration
>
Role
tab.
Direction
Displays the direction which the role is associated with. The role can be
associated in either the
Inbound
or
Outbound
direction.
Precedence
Displays the
ACL Precedence
. The ACL precedence range is 1-100.
ACL Name
Displays the name of the ACL associated with each role. ACLs can be
configured on the ACL tab.
To Next Page
Loading...