Controller Security
Summit WM3000 Series Controller System Reference Guide366
.
3 Refer to the following to assess the validity and total NAT translation configurations available to the
controller.
4 Click on the Export button to export the contents of the table to a Comma Separated Values file (CSV).
Configuring IKE Settings
IKE (also known as ISAKMP) is the negotiation protocol enabling two hosts to agree on how to build an
IPSec security association. To configure the security appliance for virtual private networks, set global
IKE parameters that apply system wide and define IKE policies peers negotiate to establish a VPN
tunnel.
IKE protocol is an IPSec standard protocol used to ensure security for VPN negotiation, and remote host
or network access. IKE provides an automatic means of negotiation and authentication for
communication between two or more parties. IKE manages IPSec keys automatically.
Inside-Global
Displays the internal global pool of addresses (allocated out of the
controller’s private address space but relevant to the outside) you are
trying to prevent from being exposed to the outside world.
Inside Local
Displays the internal local pool of addresses (addresses internal to the
controller) you are trying to prevent from being exposed to the outside
world.
Outside-Global
The IP address of an outside host as it appears to the inside network.
Outside-Local
The configured IP address assigned to a host in the outside network.
To Next Page
Loading...