Controller Security
Summit WM3000 Series Controller System Reference Guide382
7 To add a new range of IP addresses, click the Add button (within the IP Range tab) and define the
range in the fields provided. Click OK when completed to save the changes.
8 Click Cancel to disregard the changes and revert to the last saved configuration.
Configuring IPSEC VPN Authentication
If IKE is not used for establishing security associations, there is no negotiation of security associations.
Consequently, the configuration information in both systems must be the same for traffic to be
processed successfully by the IPSec resource. Select the Authentication tab to define the credential
verification mechanisms used with the IPSEC VPN configuration.
To define the IPSEc VPN authentication configuration:
1 Select Security > IPSec VPN from the main menu tree.
2 Select the Authentication tab.
To Next Page
Loading...