Summit WM3000 Series Controller System Reference Guide 393
a Select the Seq #/Name.
b Enter the name of the Transform set used with the Crypto Map.
7 Click OK when completed to save the configuration of the Crypto Map transform set.
Crypto Map Interfaces
To review the interfaces currently available to the Crypto Maps or assign an interface:
A Crypto Map cannot get applied to more than one interface at a time. To apply the same Crypto Map settings to
multiple interfaces, create a unique Crypto Map for each interface.
1 Select Security > IPSec VPN from the main menu tree.
2 Click the Crypto Maps tab and select Interfaces.
To Next Page
Loading...