Summit WM3000 Series Controller System Reference Guide 395
1 Select Security > IPSec VPN from the main menu tree.
2 Click the IPSec SAs tab.
3 Refer to the following security association data:
4 Use the page navigation facility (found on top of the table next to the Show Filtering Options link) to
view the list of security associations.
The controller can display a maximum of 600 security associations. To enable a search through the
list, the Security > IPSec VPN screen provides a page navigation facility. Up to 30 security
associations display per page.
Index
Displays the numerical (if defined) ID for the security association. Use
the index to differentiate the index from others with similar
configurations.
Local Peer
Displays the name of the local peer at the near side of the VPN
connection.
Remote Peer
Displays the name of the remote peer at the far side of the VPN
connection.
ESP SPI In
SPI specified in the
Encapsulating Security Payload
(ESP) inbound
header.
ESP SPI Out
SPI specified in the
Encapsulating Security Payload
(ESP) outbound
header.
AH SPI In
Displays the inbound
Authentication Header
(AH).
AH SPI Out
Displays the outbound
Authentication Header
(AH).
Cipher Algorithm
Displays the algorithm used with the ESP cipher.
MAC Algorithm
Displays the algorithm used with the security association.
To Next Page
Loading...