Controller Security
Summit WM3000 Series Controller System Reference Guide408
3 Refer to the user groups listed to review the following read-only attributes for each group:
4 Refer to the WLANs Assigned area of the Groups tab to review which controller WLANs are available
for use with configured groups.
Name
Displays the unique name assigned to each group. The group name
should be indicative of the user population within and their shared
activity within the controller managed network.
Guest Group
Displays whether a specific group has been defined as a guest group
(indicated with a green check mark) or has been configured as permanent
group (indicated with a red X). Guest users have temporary Radius server
access.
VLAN ID
Display the VLAN ID(s) used by each group. The VLAN ID is
representative of the shared SSID each group member (user) employs to
interoperate with one another within the controller managed network
(once authenticated by the local Radius server).
Time of Access Start
Displays the time each group is authenticated to interoperate within the
controller managed network. Each user within the group is authenticated
with the local Radius server. Group members successfully authenticated
are allowed access to the controller managed network under the
restrictions defined for that group.
Time of Access End
Displays the time each group’s user base will loose access privileges.
After this time, users within this group will not be authenticated by the
local Radius server. However, if a user is part of a different group that
has not exceeded their access interval, then the user may still
interoperate with the controller (remain authenticated) as part of that
group.
To Next Page
Loading...