Controller Security
Summit WM3000 Series Controller System Reference Guide416
3 Select the Configure the trustpoint checkbox to enable the new self signed certificate configured as a
trustpoint.
4 Select the Automatically generate certificate with default values checkbox to create a certificate using
values the controller assigns by default.
This option is recommended for generic certificates that do not represent a unique or custom
controller configuration.
5 Select the Enter certificate credentials radio button to manually enter the values of a unique certificate.
If you anticipate using generic (default) values, consider using the Automatically generate certificate
with default values option.
6 Provide the following information for the certificate:
Country
Define the Country used in the Self-Signed Certificate. By default, the
Country is US. The field can be modified by the user to other values. This
is a required field and must not exceed 2 characters.
State
Enter a State/Prov. for the state or province name used in the Self-Signed
Certificate. By default, the State/Prov. field is CA. This is a required field.
City
Enter a City to represent the city name used in the Self-Signed
Certificate. By default, the City name is Santa Clara. This is a required
field.
Organization
Define an Organization for the organization used in the Self-Signed
Certificate. By default, it is Extreme Networks, Inc. The user is allowed to
modify the Organization name. This is a required field.
To Next Page
Loading...