Controller Security
Summit WM3000 Series Controller System Reference Guide418
11 Click the Next button to complete the certificate request.
Using the Wizard Delete Operation. The wizard can also be used to delete entire trustpoints, the certificate
used with a trustpoint or the CA root certificate use with a trustpoint. Delete trustpoint properties as
they become obsolete or the properties of a certificate are no longer relevant to the operation of the
controller.
To use the wizard to delete trustpoint properties:
1 Select the Delete Operations radio button and click the Next button.
The next page of the wizard is used to delete a trustpoint.
To
Use the
To
field to define whether the target certificate is to be sent to
the system's local disk (
Local Disk)
or to an external server (
Server
).
File
Specify a filename for the certificate to be save as on the target server or
local disk.
Using
Use the Using drop down-menu to configure whether the log file transfer
is sent using
FTP
or
TFTP
.
IP Address
Specify the server
IP Address
used as the controller destination for
certificate requests.
User ID
Enter the
User ID
credentials required to send the file to the target
location.
Use the User ID for FTP transfers only
Password
Enter the
Password
required to send the file to the target location using
FTP.
Path
Specify the appropriate
Path
name to the target directory on the local
system disk or server as configured using the "To" parameter.
To Next Page
Loading...