Summit WM3000 Series Controller System Reference Guide 431
1 Select Management Access > SNMP Access from the main menu tree.
2 Select the Message Parameters tab from within the SNMP Access screen.
3 Define the following vales as required to define how SNMP Access messages are received:
4 Click the Apply button to save changes made to the screen since the last saved configuration.
5 Click the Revert button to revert the screen back to its last saved configuration. Changes made since
the contents of the screen were last applied are discarded.
Accessing SNMP v2/v3 Statistics
Refer to the Statistics screen for a read-only overview of SNMP V2/V3 events and their current values.
The screen also displays Usm Statistics (SNMP V3 specific events specific to the User-based Security
Model) and their values.
To edit an SNMP v3 user profile:
1 Select Management Access > SNMP Access from the main menu tree.
2 Select the Statistics tab from within the SNMP Access screen.
Retries
Define the number of times the controller polls for SNMP values before
giving up.The default retry value is 3.
Timeout
Define a timeout interval (in seconds) the controller uses to timeout
SNMP connection attempts. the default value is 10 seconds.
Rows per Request
Set the number of data rows returned per SNMP connection. The default
value is 10 rows.
To Next Page
Loading...