Summit WM3000 Series Controller System Reference Guide 439
Configuring SNMP Trap Receivers
Refer to the Trap Receivers screen to review the attributes of existing SNMP trap receivers (including
destination address, port, community and trap version). A new v2c or v3 trap receiver can be added to
the existing list by clicking the Add button.
To configure the attributes of SNMP trap receivers:
5 Non Unicast
Packets
Greater than A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
N/A %
6 Transmitted
Packet dropped
Greater than A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
N/A %
7 Transmitted
Packet Average
retries
Greater than A decimal
number
greater than
0.00 and less
than or equal
to 16.00
A decimal
number
greater than
0.00 and less
than or equal
to 16.00
A decimal
number
greater than
0.00 and less
than or equal
to 16.00
N/A Retrie
s
8 Undecrypted
received packets
Greater than A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
A decimal
number
greater than
0.00 and less
than or equal
to 100.00
N/A %
9 Total MUs Greater than N/A N/A
A decimal N/
A in the range
<1-1000>
N/A
A decimal N/
A in the
range <1-
1000>
A decimal
number in
the range <1-
1000>
Count
10 Average Noise
Level
Worse Than A decimal
number less
than -0.00
and greater
than or equal
to -120.00
A decimal
number less
than -0.00
and greater
than or equal
to -120.00
A decimal
number less
than -0.00
and greater
than or equal
to -120.00
N/A dBm
#
Threshold Name Condition Station Range Radio Range WLAN Range Wireless
Controller
Range
Units
To Next Page
Loading...