Controller Management
Summit WM3000 Series Controller System Reference Guide448
To create guest users, a guest administrator must be assigned a WebUser Administrator access mode. None of
the other modes launch the required Guest User Configuration screen upn login.
When the guest-admin user logs in, they are redirected to a Guest User Configuration screen, wherein
start and end user permissions can be defined in respect to specific users.
6 Add guest users by name, start date and time, expiry date and time and user group.
7 Optionally, click the Generate button to automatically create a username and password for each guest
user.
8 Repeat this process as necessary until all required guest users have been created with relevant
passwords and start/end guest group permissions.
Configuring Controller Authentication
The controller provides the capability to proxy authenticate requests to a remote Radius Server. Refer to
the Authentication tab to view and configure the Radius Server used by the local user to log into the
controller.
The Radius configuration described in this section is independent of other Radius Server configuration activities
performed using other parts of the controller.
1 Select Management Access > Users from the main menu tree.
2 Select the Authentication tab.
To Next Page
Loading...