Extreme Networks Summit WM3000 Series - Controller Memory Processes

Diagnostics
Summit WM3000 Series Controller System Reference Guide460
Controller Memory Processes
The Processes tab displays the number of processes in use and percentage of memory usage limit per
process.
1 Select Diagnostics from the main tree menu.
2 Select the Processes tab.
3 The Processes tab has two fields:
● General
● Processes by highest memory consumption
4 Refer to the General field to review the number of processes in use and percentage of memory usage
per process. The value defined is the maximum limit per process during periods of increased and
network activity and is negotiated amongst the other process as needed during normal periods of
controller activity.
5 Processes by highest memory consumption displays a graph of the top ten controller processes based on
memory consumption. Use this information to determine if a spike in consumption with the
controller priorities in processing data traffic within the controller managed network.
6 Click the Apply button to commit and apply any changes to the memory usage limit.
7 Click the Revert button to revert back to the last saved configuration.
Other Controller Resources
The Other Resources tab displays the memory allocation of Packet Buffer, IP Route Cache and File
Descriptors.