Diagnostics
Summit WM3000 Series Controller System Reference Guide470
Viewing Panic Details
Use the View facility to review the entire contents of a panic snapshot before transferring or deleting the
file. The view screen enables you to display the entire file.
To review Panic Snapsho ts:
1 Select Diagnostics > Panic Snapshots from the main menu.
2 Select a panic from those available and click the View button.
3 Refer to the following information to review the severity of the panic file:
Transferring Panic Files
It is recommended that panic snapshots files be kept in a safe location off the system used to create the
initial files. Use the Transfer Files screen to specify a location where files can be archived without the risk
of them being lost or corrupted.
For information on transferring panic files:
1 Select Diagnostics > Panic Snapshots from the main menu.
2 Select a record from those available and click the Tr ansfer button.
3 Use the From drop-down menu to specify the location from which the file is sent. If only the applet
is available as a transfer location, use the default controller option.
4 Select a file for the file transfer from the File drop-down menu. The drop-down menu contains the
panic files listed within the File-Mgmt screen.
5 Use the To drop-down menu (within the Target field) to define whether the target panic file is to be
sent to the system's local disk (Local Disk) or to an external server (Server).
6 Provide the name of the file to be transferred to the location specified within the File field.
7 If Server has been selected as the source, use the Using drop down-menu to configure whether the
panic file transfer will be sent using FTP or TFTP.
8 If Server has been selected as the source, enter the IP Address of the destination server or system
receiving the target panic file.
9 If Server has been selected as the source, enter the User ID credentials required to send the file to the
target location. The User ID is required for FTP transfers only.
10 If Server has been selected as the source, enter the Password required (for FTP transfers) to send the
file to the target location.
11 Specify the appropriate path name to the target directory on the local system disk or server as
configured using the "To" parameter. If local server is selected, use the Browse button to specify a
location on your local machine.
Main
The
Main
parameter displays detailed panic information for the selected
file.
Page
Panic information may be spread across multiple pages. The Page value
allows the user to view complete information on the panic. Use the < and
> options to navigate through the contents of the file.
Refresh
Click the
Refresh
button to update the data displayed within the screen
to the latest values.
Close
Click the
Close
button to exit the screen.
To Next Page
Loading...