Summit WM3000 Series Controller System Reference Guide 477
Destination IP
Displays the numeric (non DNS address) destination for the device
transmitted the ping packets.
Packets Sent
Displays the number of packets transmitted to the target device IP
address. Compare this value with the number of packets received to
assess the connection quality with the target device.
Packets Received
Displays the number of packets received from the target device. If this
number is significantly lower than the number sent to the target device,
consider removing this device from consideration for permanent
connection with the controller.
Min RTT
Displays the quickest round trip time for ping packets transmitted from
the controller to its destination IP address. This may reflect the time
when data traffic was at its lowest for the two devices.
Max RTT
Displays the longest round trip time for ping packets transmitted from the
controller to its destination IP address. This may reflect the time when
data traffic was at its most congested for the two devices.
Average RTT
Displays the average round trip time for ping packets transmitted between
the controller and its destination IP address. Use this value as a general
baseline (along with packets sent vs packets received) for the overall
connection and association potential between the controller and target
device.
Last Response
Displays the time (in seconds) the controller last “heard” the destination
IP address over the controller managed network. Use this time (in
contention with the RTT values displayed) to determine whether this
device warrants a permanent controller connection.
To Next Page
Loading...