EasyManua.ls Logo

Extreme Networks Summit WM3000 Series - Troubleshooting Information; General Troubleshooting; Wireless Controller Issues

Extreme Networks Summit WM3000 Series
513 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Summit WM3000 Series Controller System Reference Guide 499
C Troubleshooting Information
This appendix provides basic troubleshooting information and workarounds to known conditions the
user may encounter. Wherever possible, it includes possible suggestions or solutions to resolve the
issues. It is divided into the following section:
General Troubleshooting on page 499
Troubleshooting SNMP Issues on page 505
Security Issues on page 506
General Troubleshooting
This section describes common system issues and what to look for while diagnosing the cause of a
problem.
The following information is included:
Wireless Controller Issues
Access Point Issues
Mobile Unit Issues
Miscellaneous Issues
System Logging Mechanism
Wireless Controller Issues
This section describes various issues that may occur when working with an Extreme Networks wireless
LAN controller. Possible issues include:
Controller Does Not Boot Up
Controller Does Not Obtain an IP Address through DHCP
Unable to Connect to the Controller using Telnet or SSH
Web UI is Sluggish, Does Not Refresh Properly, or Does Not Respond
Console Port is Not Responding
Controller Does Not Boot Up
The Extreme Networks wireless LAN controller does not boot up to a username prompt via CLI console
or Telnet.
The table below provides suggestions to troubleshoot this issue.